Xinhai Mine EPC+M+O Service
Disc Feeder

Disc Feeder

[Introduction]: A traditional continuous feeding equipment for powder material

[Capacity]: 0~88.4t/h

[Improvement]: Install speed adjustment motor according to need; control feeding volume by adjusting the rotation speed of disc

ADVANTAGES

PRODUCT STRUCTURE

Bulky materials entering into the cylinder from the hopper accumulate by itself weight on the disk. The natural angle of material is controlled on the disk by adjusting the gap between the sleeve and disc. When the disk rotates, the materials are scraped into accepted hopper by unloading knife, so with the continuous rotation of the disk, the materials are fed evenly. Adjust the gap between the unloading knife and the disk to control the feeding volume.

TECHNICAL PARAMETERS

Type Model Disk Diameter (mm) Rotating Speed of Disk (r/min) Max. Feed Size (mm) Feed Capacity (t/h) Motor Model Motor Power
(kW)
Weight
(kg)
YG300 300 10. 0 20 0~ 1. 8 Y80L- 4 0. 55 115
YG400 400 10. 7 0~ 2. 6 Y90L- 6 1. 1 120
YG500 500 0~ 3. 3 124
Close YG600 600 10. 0 0~5. 0 130
Hanged YG800 800 9 30 0~8. 0 Y80L- 4 0.55 195
YG1000 1000 9 30 0~ 12 Y90L- 4 1. 5 263
YG1500 1500 7 40 0~ 22 Y132M2-6 5. 5 755
YG2000 2000 5 50 0〜80 Y160L-6 11 2517
DK600 600 7. 53 25 1. 8~ 3. 9 Y90L- 6 1. 1 410
DK800 800 7. 53 30 3. 5~ 7. 6 600
DK1000 1000 7. 50 40 1.8〜16.7 Y100L- 6 1. 5 725
Open
Hanged
DK1300 1300 6. 5 50 4. 3~27. 9 Y132S- 6 3 846
DK1600 1600 6 60 7.03~48.6 Y132M1- 6 4 1980
DK1800 1800 5 70 9.26~60 Y132M2- 6 5.5 3070
DK2000 2000 80 13.6~88.4 Y132M2- 6 3260

SUCCESSFUL CASE

RELATED PRODUCTS

RELATED NEWS

xinhai